Desert Island Ditties and Bitties

This is where you can rest a while and discuss anything - doesn't have to be steel guitar related!

Desert Island Ditties and Bitties

Postby Danny Mitchell » Sat Oct 23, 2021 5:22 pm

Time for another, Topic For Thumb Twiddler's.

So, you can take one tune (played on steel, of course), one dream guitar of choice, one dream amp of choice and a bottle of something palatable(with mixer, if required).

To get the ball rolling, here's mine.
Tune......Lloyd Green's Venus Moon.

Guitar.....The new Sierra S10
http://sierrasteels.com/products/pedal-steel-guitars.html

Amp.....The Telonics TCA500c
https://www.telonics.com/products/proaudio/tca-500-combo.php

Bottle.....Buckfast Tonic Wine with mixer, a bottle of Champagne, voilà- A Velvet Elvis!

The best combination will be chosen by phone-in, calls will cost a tenner and the winner will be marooned on the beautiful Isle of Ailsa Craig. Good luck!
GFI Ultra keyless S10 4+5 Emmon's setup + Sigler, Li'l Izzy, Hilton volume pedal, Roland Cube 80gx, Joyo American Sound Pre-amp, Behringer VD400 Delay Pedal, Peterson Strobo Plus HD and a brace of bars, Ben's, Ezzee-Slide, Pearse, BJS, SIT nickel strings.
User avatar
Danny Mitchell
Dedicated Member
Dedicated Member
 
Posts: 2210
Joined: Wed Aug 27, 2014 11:15 am

Re: Desert Island Ditties and Bitties

Postby Ken Byng » Sun Oct 24, 2021 2:36 pm

A great collection Mr Mitchell.

My favourite tune would be The Lighthouse by Mike Johnson. https://soundcloud.com/steve-kritz/11-t ... house-mike (complete with backing track)

Image.

Steel guitar would be a special edition D10 Emmons NOS Wrap Around ReSound'65 Generation 2 guitar from the new Emmons Guitar Co. fully loaded and with my setup 9 + 9 complete with splits and custom finish in red glass mica.

Amp would be my trusty Webb 614E complete with Travis Toy TT 15 speaker, and volume pedal - Telonics silver anodised FP-100 Multi-Taper volume pedal. Tone bar would be a Basil Bar 1" polymer special.

Bottle - 70CL of Gordon & MacPhail GLENTAUCHERS Speyside Single Malt Scotch Whiskey (distilled in 1996 and bottled in 2015) C/W a special Irish whiskey glass.
https://i.etsystatic.com/30422712/r/il/a3c4cb/3317955118/il_1588xN.3317955118_gr4d.jpg
Show Pro D10 (amber) 8 + 6, MSA Signature XL D10 (redburst) 9 + 6, Sho~Bud D10 (sunburst) Pro 111 8 + 6, Emmons D10 Push Pull - (black) 8+5, Zumsteel D10 (blue) 8 + 8, Hudson pedal resonator, 10 string lap steel. Telonics, Peavey & Webb amps,
User avatar
Ken Byng
Dedicated Member
Dedicated Member
 
Posts: 3365
Joined: Wed Jul 07, 2010 8:46 pm
Location: Southampton, United Kingdom

Re: Desert Island Ditties and Bitties

Postby Danny Mitchell » Sun Oct 24, 2021 6:11 pm

Thanks for playing along, Ken.
Killer tune, and I thinking that's the only style of steel you don't already have! It's a beauty! Interesting amp choice, I've heard Bob's Webb and that's a big sound. Very discerning tipple, too. If you're not careful you're going to end up on Ailsa!
GFI Ultra keyless S10 4+5 Emmon's setup + Sigler, Li'l Izzy, Hilton volume pedal, Roland Cube 80gx, Joyo American Sound Pre-amp, Behringer VD400 Delay Pedal, Peterson Strobo Plus HD and a brace of bars, Ben's, Ezzee-Slide, Pearse, BJS, SIT nickel strings.
User avatar
Danny Mitchell
Dedicated Member
Dedicated Member
 
Posts: 2210
Joined: Wed Aug 27, 2014 11:15 am

Re: Desert Island Ditties and Bitties

Postby Ken Byng » Mon Oct 25, 2021 8:25 am

Danny Mitchell wrote:Thanks for playing along, Ken.
Killer tune, and I thinking that's the only style of steel you don't already have! It's a beauty! Interesting amp choice, I've heard Bob's Webb and that's a big sound. Very discerning tipple, too. If you're not careful you're going to end up on Ailsa!


To be honest Danny, there isn't much to choose between my Webb with an aluminium sound chamber and my Telonics TCA500 combo. But there is something classic about the sound that an Emmons push pull makes through a Webb 614E, especially the one with the internal sound chamber and 5 closable port holes. It's a very detailed sound with a huge bottom end.

Image
Show Pro D10 (amber) 8 + 6, MSA Signature XL D10 (redburst) 9 + 6, Sho~Bud D10 (sunburst) Pro 111 8 + 6, Emmons D10 Push Pull - (black) 8+5, Zumsteel D10 (blue) 8 + 8, Hudson pedal resonator, 10 string lap steel. Telonics, Peavey & Webb amps,
User avatar
Ken Byng
Dedicated Member
Dedicated Member
 
Posts: 3365
Joined: Wed Jul 07, 2010 8:46 pm
Location: Southampton, United Kingdom

Re: Desert Island Ditties and Bitties

Postby Danny Mitchell » Mon Oct 25, 2021 9:12 am

What a great concept, Ken, adjustable ports to allow the 'tuning' of the bottom end! (I assume)
It's a wonder others haven't followed suit.
GFI Ultra keyless S10 4+5 Emmon's setup + Sigler, Li'l Izzy, Hilton volume pedal, Roland Cube 80gx, Joyo American Sound Pre-amp, Behringer VD400 Delay Pedal, Peterson Strobo Plus HD and a brace of bars, Ben's, Ezzee-Slide, Pearse, BJS, SIT nickel strings.
User avatar
Danny Mitchell
Dedicated Member
Dedicated Member
 
Posts: 2210
Joined: Wed Aug 27, 2014 11:15 am

Re: Desert Island Ditties and Bitties

Postby Ken Byng » Mon Oct 25, 2021 11:01 am

It is a great idea Danny. I just close off 2 of the front port tubes at the top, and keep the other 2 open along with a rear panel in the chamber. I have had to order a couple of mains electrolytic capacitors (10,000uf 100v) for it, as one of the original caps had gone short circuit. Not bad really - the first faulty component in 25 years. 8-)
Show Pro D10 (amber) 8 + 6, MSA Signature XL D10 (redburst) 9 + 6, Sho~Bud D10 (sunburst) Pro 111 8 + 6, Emmons D10 Push Pull - (black) 8+5, Zumsteel D10 (blue) 8 + 8, Hudson pedal resonator, 10 string lap steel. Telonics, Peavey & Webb amps,
User avatar
Ken Byng
Dedicated Member
Dedicated Member
 
Posts: 3365
Joined: Wed Jul 07, 2010 8:46 pm
Location: Southampton, United Kingdom


Return to Steel Guitar Cafe

Who is online

Users browsing this forum: No registered users and 3 guests