Fender Steel King (Light studio use)

Old "Wanted" and "For Sale" posts go in here. Read Only.

Fender Steel King (Light studio use)

Postby Basil Henriques » Thu Feb 05, 2015 6:06 pm

OK It's 200watts especially designed for steel guitar and NOT available any-more..
This one has had very light studio use only and never was gigged..
Amp, Footswitch, Embroidered custom cover, manual and castors.

£450 only..
Price/Payment: £450 COD or Paypal to [email protected]
Will deliver up to 60 miles from CV10 Nuneaton.. FREE, or £12.50 per 100 miles after 60.. Or post at buyers expense.
Text or ‘phone 07800-646-645 24/7

The last UK RRP Was £816.00 at Gear4Music.com

The Steel King delivers legendary Fender® tone and performance for the modern Steel Guitarist. Its clean, high-powered, full-frequency reproduction makes it a good choice for guitar players specialising in Jazz,
Country, and World Music styles, too!
• 200 Watts into 4 ohms—Loud & clean!
• All-new preamp design—tailored specifically for clean, versatile tone shaping
• Professional XLR line output with Level control, Ground Lift, and Pre-Post EQ switch
• Effects loop and Tuner Output with Mute
• Limiter with On-Off button—prevents distortion when you play hard
• Three-button footswitch—included!
• Genuine Fender Custom 15 Driver based on the now collectable JBL® D130F model used by Fender in the1960’s and 70’s.
This updated 15" speaker delivers the clean, precision performance that many specialist players demand.
Speaker construction details:
• Cast frame—for strength
• Shallow cone profile—for wider dispersion and stage coverage
• High flux density and large, lightweight voice coil— for incredible sensitivity
• Aluminium centre cap—for distinct high-frequency response
• Fitted Cover—included!

Thank you for choosing Fender® —Tone,, Tradition and Inovation—since 1946



http://www.gear4music.com/G4M/Fender-St ... lifier/B11

The 200-watt (at 4 ohms) Steel-King features a genuine Fender Custom 15 driver; an all-new preamp design tailored specifically for clean, versatile tone shaping; XLR line output with level control, ground lift and pre/post EQ; effects loop and tuner output with mute; limiter with on-off button (prevents distortion when playing hard); genuine Fender long-spring reverb by Accutronics and a three-button footswitch.

Solid-state amplifier for the modern pedal steel guitar, delivers clean, genuine Fender tone with Reverb
Type: Solid State Amp
Output: 200 watts into 4 ohms - 4 ohms operation
Speakers: 1-15 inch Custom Eminence 4 ohm Cast Frame Speaker with Ceramic Magnet
Channels: 1 Channel
Controls: Input Pad, Gain, EQ Tilt, Treble, Mid Level, Mid Frequency, Bass, Reverb, Mute Switch, Master Volume, Limiter On/Off switch C
overing: Black Textured Vinyl with Silver Grille Cloth
Weight: 66 lbs. (29.93 kg)
Dimensions: Height: 21 inches (53.34 cm), Width: 20 inches (50.8 cm), Depth: 12.5 inches (31.8 cm)
Fender 3-Button Footswitch for Reverb, Tuner Mute and Effects Loop.

Image

Image

Image

£450 only..
Price/Payment: £450 COD or Paypal to [email protected]
Will deliver up to 60 miles from CV10 Nuneaton.. FREE, or £12.50 per 100 miles after 60..
Text or ‘phone 07800-646-645 24/7

The last UK RRP Was £816.00 at Gear4Music.com
Image
Steelies do it without fretting
Image
User avatar
Basil Henriques
Dedicated Member
Dedicated Member
 
Posts: 1305
Joined: Wed Jul 07, 2010 1:05 am
Location: Trevelmond, Liskeard, Cornish Riviera, United Kingdom
Real Name: Basil Henriques

Re: Fender Steel King (Light studio use)

Postby Basil Henriques » Thu Feb 12, 2015 2:31 am

So Buddy reckoned this amp very highly..
Image

http://www.buddyemmons.com/fenderparty.htm

Screen Shot 2015-02-12 at 02.22.28.png


Buddy Emmons
Member

From: Hermitage, TN USA
posted 26 July 2004 12:22 PM
My settings,
EQ Tilt - 9 o’clock for C6 and around 10 or 11 o’clock for E9.
Treble - around 11 o’clock.
Mid Level - 10 or 11 o’clock. This control doesn’t work unless the Mid Frequency knob is moved from the center setting.
Mid Frequency - 11 o’clock.
Bass – 1 o’clock
Reverb – 10 o’clock

The Steel King is designed to get a good sound with all knobs straight up, but as you know different guitars will require variations from those points. I’ve tried three or four different brand guitars with the amp and found a good tone for all of them. The settings I gave you are for my JCH, but the amp is so user friendly, you’ll not have to hunt long for a tone that compliments your guitar.


AND
Buddy Emmons
Member

From: Hermitage, TN USA
posted 22 December 2004 04:03 AM
Today I have two Peavey amps, a Standel, and a Fender Steel King. I favor the Steel King because it has a sweet spot in the mid range similar to the Standel but is less prone to distortion.
User avatar
Basil Henriques
Dedicated Member
Dedicated Member
 
Posts: 1305
Joined: Wed Jul 07, 2010 1:05 am
Location: Trevelmond, Liskeard, Cornish Riviera, United Kingdom
Real Name: Basil Henriques

Re: Fender Steel King (Light studio use)

Postby Basil Henriques » Sun Jan 24, 2021 11:15 am

Now reduced to £300. Collect from PL14 4++ or I will deliver at a cost of £15 per 100 miles.
Text me on 07800-646-645 or eMail at [email protected]
Image
Steelies do it without fretting
Image
User avatar
Basil Henriques
Dedicated Member
Dedicated Member
 
Posts: 1305
Joined: Wed Jul 07, 2010 1:05 am
Location: Trevelmond, Liskeard, Cornish Riviera, United Kingdom
Real Name: Basil Henriques

Re: Fender Steel King (Light studio use)

Postby Uncle Roy » Mon Jan 25, 2021 11:38 am

Basil,
I hope you remember that nonessential travel is forbidden at the moment.
User avatar
Uncle Roy
Moderator
Moderator
 
Posts: 2787
Joined: Tue Jul 06, 2010 3:59 pm

Re: Fender Steel King CLOSE PLEASE.

Postby Basil Henriques » Mon Jan 25, 2021 2:59 pm

Decided to keep it as I'd never find another one and they are an incredible amp..so this thread can be closed please.
Image
Steelies do it without fretting
Image
User avatar
Basil Henriques
Dedicated Member
Dedicated Member
 
Posts: 1305
Joined: Wed Jul 07, 2010 1:05 am
Location: Trevelmond, Liskeard, Cornish Riviera, United Kingdom
Real Name: Basil Henriques

Re: Fender Steel King (Light studio use)

Postby Arcada » Mon Jan 25, 2021 5:33 pm

Basil Henriques wrote:this thread can be closed please.

Closed.

BTW there's something going on with your avatar and post images, Basil.

At a guess I'd say you've disabled hotlinking on http://www.waikiki-islanders.com/ as the images are all still there, but when referenced from this site they aren't showing.
User avatar
Arcada
Site Admin
Site Admin
 
Posts: 745
Joined: Tue Jul 06, 2010 4:28 pm
Location: Edinburgh, UK
Real Name: Marc


Return to Archive

Who is online

Users browsing this forum: No registered users and 1 guest

cron