What amplifier settings give the unique steel sound, that all or part could be tried on a lap instrument?.
My own left handed eight string has no peddles just a volume swell. Buddy R..IP. Doug Frost.
Amplifier settings
5 posts
• Page 1 of 1
Amplifier settings
by Doug frost » Thu Jun 16, 2016 10:49 am
- Doug frost
- New Member
- Posts: 3
- Joined: Tue Jun 14, 2016 12:44 pm
Re: Amplifier settings
by rogerp1 » Thu Jun 16, 2016 12:50 pm
I have found that my lap steel amp settings that sound great sound a bit rubbish on my pedal steel....dont understand this exactly but this is what Ive found
GFI Ultra SD10 3X5, Almost a Sho Bud SD10 3X4, Goodrich 120 VP, Cube 40XL, Zoom 100BT effects pedal
National Grand console D8, Cheapo Weissenborn, Several home made 6 stringers Mainly play C6th lap and E9th psg
Rossendale UK
National Grand console D8, Cheapo Weissenborn, Several home made 6 stringers Mainly play C6th lap and E9th psg
Rossendale UK
-
rogerp1 - Member
- Posts: 171
- Joined: Wed Mar 18, 2015 1:17 pm
- Location: Rossendale, UK
- Real Name: Roger Palmer
Re: Amplifier settings
by nevada150 » Thu Jun 16, 2016 12:57 pm
Doug,
It would help if you tell us what Amp you play through and what type of pickup is on the guitar. Humbucker or Single Coil?
Regards,
Keith.
It would help if you tell us what Amp you play through and what type of pickup is on the guitar. Humbucker or Single Coil?
Regards,
Keith.
- nevada150
- Deceased
- Posts: 375
- Joined: Fri Dec 20, 2013 6:39 pm
- Location: Hartlepool
- Real Name: Keith Glendinning
Re: Amplifier settings
by Doug frost » Fri Jun 17, 2016 2:50 pm
Keith, not sure if my first reply made it, will try again to cover.
I have a Bill Lawrence, twin row poles (Humbucker ?) and a Roland Cube.
Sometime when available, I should get a go at a valve Fender.
Thanks for quick responce. Doug Frost.
I have a Bill Lawrence, twin row poles (Humbucker ?) and a Roland Cube.
Sometime when available, I should get a go at a valve Fender.
Thanks for quick responce. Doug Frost.
- Doug frost
- New Member
- Posts: 3
- Joined: Tue Jun 14, 2016 12:44 pm
Re: Amplifier settings
by nevada150 » Fri Jun 17, 2016 3:25 pm
Hi Doug,
OK this may help as a starting point. My 8 String with a twin blade humbucker is tuned to C6 and I use a Roland Cube 20W with the following settings.
Bass 10:00 o'clock
Mid. 10:00 o'clock
Treble 9:00 o'clock
Reverb @ 2
I also use a Fender Princeton 112 (Tranny) amp set as follows.
Bass 5
Treble 3
Reverb 2
I like a "Jazzier" sound when I play, but these settings may help you.
Good luck,
Keith.
OK this may help as a starting point. My 8 String with a twin blade humbucker is tuned to C6 and I use a Roland Cube 20W with the following settings.
Bass 10:00 o'clock
Mid. 10:00 o'clock
Treble 9:00 o'clock
Reverb @ 2
I also use a Fender Princeton 112 (Tranny) amp set as follows.
Bass 5
Treble 3
Reverb 2
I like a "Jazzier" sound when I play, but these settings may help you.
Good luck,
Keith.
- nevada150
- Deceased
- Posts: 375
- Joined: Fri Dec 20, 2013 6:39 pm
- Location: Hartlepool
- Real Name: Keith Glendinning
5 posts
• Page 1 of 1
Return to Steel Guitar Technical
Who is online
Users browsing this forum: No registered users and 1 guest