New member from Cheshire

The place for our latest members to say hi! and for us to welcome!

New member from Cheshire

Postby davidcotton » Mon Feb 03, 2020 3:28 pm

Hello everyone,

I've just joined the forum and look forward to sharing and learning. I began playing music on a semi-pro basis when I was around eight years old, and played full time in my 20s. I've continued to play ever since (I'm 64) and six years ago reformed a band I played in as a student in the early to mid-70s. Three of the original members have got back together with a fourth person and we have been gigging, playing small festivals and recording. We released an album earlier this month. I'm a multi-instrumentalist with a vast collection of instruments (around 70 at the last count). More than anything I play banjo, mandolin and dobro and some lap steel, too. I'm about to buy a pedal steel, and can't wait to start learning it.

I edit a specialist magazine called BMG, which has been running on and off since 1903, and is primarily for players of banjo, mandolin, guitar and kindred fretted instruments. It includes a music supplement and we always include a piece for lap steel, arranged by Maurice Hipkiss.

David
davidcotton
New Member
New Member
 
Posts: 6
Joined: Mon Feb 03, 2020 2:59 pm
Real Name: David Cotton

Re: New member from Cheshire

Postby Danny Mitchell » Mon Feb 03, 2020 5:44 pm

Welcome David,
Good luck with your pedal steel adventure, given that you're already a lap steeler, I'm sure you'll find the transition smooth. If not you'll find plenty of good help and advice on here.
70 instruments! Crivens! That puts my 6 (comb and paper included) to shame.
GFI Ultra keyless S10 4+5 Emmon's setup + Sigler, Li'l Izzy, Hilton volume pedal, Roland Cube 80gx, Joyo American Sound Pre-amp, Behringer VD400 Delay Pedal, Peterson Strobo Plus HD and a brace of bars, Ben's, Ezzee-Slide, Pearse, BJS, SIT nickel strings.
User avatar
Danny Mitchell
Dedicated Member
Dedicated Member
 
Posts: 2210
Joined: Wed Aug 27, 2014 11:15 am

Re: New member from Cheshire

Postby JohnDavisStringsHere » Mon Feb 03, 2020 5:50 pm

welcome aboard David, I used to buy that Mag about 60 years ago! Did not know it was still going.
JohnDavisStringsHere
Dedicated Member
Dedicated Member
 
Posts: 6225
Joined: Thu Jun 16, 2011 6:19 pm
Location: St Neots
Real Name: John Davis

Re: New member from Cheshire

Postby Uncle Roy » Mon Feb 03, 2020 8:10 pm

Welcome to the forum David, best of luck on your adventure in pedal steel land.
I wrote several articles for the BMG magazine back in the late 70s, one being on Bristol based Hawaiian style lap player by the name of Bill Hemmings.
User avatar
Uncle Roy
Moderator
Moderator
 
Posts: 2791
Joined: Tue Jul 06, 2010 3:59 pm

Re: New member from Cheshire

Postby coolsteel » Tue Feb 04, 2020 8:50 pm

Welcome to the Forum David, with your wealth of playing experience on Dobro and Lap steel you will soon get to grips with the PSG. Like John I also bought and enjoyed the BMG magazine for many years.
coolsteel
Seasoned Member
Seasoned Member
 
Posts: 471
Joined: Thu Jul 08, 2010 6:59 pm
Location: West Midlands
Real Name: Richard Stanton

Re: New member from Cheshire

Postby Tony Russell Davis » Wed Feb 05, 2020 4:54 pm

JohnDavisStringsHere wrote:welcome aboard David, I used to buy that Mag about 60 years ago! Did not know it was still going.

Hey - me too! I was actually featured in it in the mid-seventies; concentrating on mando & banjo but my Northumbrian pipes got an honourable mention too, I was a folkie then :shock: .
So - welcome to the madhouse. :D
Fender SM T-8: Shakey 10-plank: Ricky 6: Harmony H7 R Smeck,: plus "home-mades"
Fender D-10: Sierra D-11:
Resos- Goldtone 8 string & Regal 7
FenderTwin: Peavey Delta Blues: Marshall AS50R: DigiTech>GK MB200->Telonics 15"
User avatar
Tony Russell Davis
Seasoned Member
Seasoned Member
 
Posts: 999
Joined: Sun Jul 11, 2010 10:11 am
Location: North Yorkshire
Real Name: Tony Russell Davis

Re: New member from Cheshire

Postby davidcotton » Mon Feb 10, 2020 11:23 am

Thanks to all for the warm welcomes. Yes, BMG is still going. It ceased publication for a number of years, when Clifford Essex Music Co. folded. The company was bought by Clem Vickery around ten years ago and BMG started up again. I've been editor officially for a little over a year but contributed to the magazine for the last nine years. Currently, I write tunes for the lap steel and Maurice Hipkiss arranges them. He uses an E13 tuning.
I am hoping that the transition to PSG will be reasonably smooth. I've been studying YouTube videos voraciously for the last few weeks and I'm raring to go. I play dobro in standard G tuning and also (for jazzy numbers) with the bass string dropped to E. I've experimented with a number of lap steel tunings, including a straight G chord like the dobro and C6. I think the answer is to have to lap steels, tuned differently!
davidcotton
New Member
New Member
 
Posts: 6
Joined: Mon Feb 03, 2020 2:59 pm
Real Name: David Cotton

Re: New member from Cheshire

Postby JohnDavisStringsHere » Mon Feb 10, 2020 4:10 pm

David I could fix that, I have a 1962 D8 Conchord Lap steel going cheap I think one neck is C6th and one is E13 but I am a pedal pusher and will never master the plank......
JohnDavisStringsHere
Dedicated Member
Dedicated Member
 
Posts: 6225
Joined: Thu Jun 16, 2011 6:19 pm
Location: St Neots
Real Name: John Davis

Re: New member from Cheshire

Postby davidcotton » Mon Feb 10, 2020 4:56 pm

Hi John,
Not sure I could justify that, given I am about to acquire a PSG! But thank you, anyway.
David
davidcotton
New Member
New Member
 
Posts: 6
Joined: Mon Feb 03, 2020 2:59 pm
Real Name: David Cotton


Return to Welcome and Hello New Members

Who is online

Users browsing this forum: No registered users and 1 guest