Page 1 of 1

Behringer VD 400

PostPosted: Tue Aug 11, 2020 4:58 pm
by TonyT
I'm hoping Danny maybe able help here, I believe he has the same delay pedal. I'm finding the repeat, when playing more than one note at a time, a little harsh, I've never used a delay before so not sure if I have it set right. I am using no repeat rate, 1/4 turn on echo and 1/8 on intensity. Reverb about 1/4 to 1/2. Any advise would be helpful

Re: Behringer VD 400

PostPosted: Tue Aug 11, 2020 8:35 pm
by Danny Mitchell
Hi Tony,
glad to be of any help if I can, here is my settings........
All.jpg
All settings

......and I go into the pedal from the FX send on the Steel King amp and back from the pedal to the FX return o the amp.
And this is how it sounded at a Gartcosh meeting, with those settings (with apologies for the honkin' intonation).......
https://www.dropbox.com/s/oosznd2j5jydv16/05%20Dan_Mexicali%20Rose.mp3?dl=0

Hope this helps a bit.

Re: Behringer VD 400

PostPosted: Wed Aug 12, 2020 7:05 pm
by TonyT
That's a really nice tone, the pedal sounds good. Like the way you played that especially lifting the last few bars. I'll have a go with your settings, it may be the way I have the in/out volume pedal with the amp/delay! I will start from scratch with everything tomorrow. Thanks for your help. Cheers

Re: Behringer VD 400

PostPosted: Thu Aug 13, 2020 11:09 am
by TonyT
Thanks Danny, I have now, as you said, put pedal into effects send/return! So much better. As I've never used effects before I obviously didn't understand these input/outputs, its blinding obvious now!! Cheers once again.

Re: Behringer VD 400

PostPosted: Thu Aug 13, 2020 11:20 am
by Danny Mitchell
Yes Tony,
It certainly seems a steelie's cross to bear; that never ending quest for 'The Tone'. A quote from Steve Earle sums us all up well; "I Ain't Ever Satisfied".

Anytime I got a new piece of kit, I would go into a rehearsal room and sit facing my amp. Then I'd start by going straight into the amp from the guitar, with the amp's settings at neutral, to get a feel of what the pickup sounded like. Then I would start adding the toys, Li'l Izzy, volume pedal, delay pedal, tweaking the tone controls to taste as I went along, and lastly I'd add the on board reverb. Then I'd take photos of all the settings, so I'd have a quick reference and starting point. Phew! What a pfaff!

Good luck with that quest!

Re: Behringer VD 400

PostPosted: Thu Aug 13, 2020 4:07 pm
by TonyT
Gonna have to be a Hilton for Xmas!!