The British Steelies Society

Posted: **Thu Aug 08, 2019 1:05 pm**

I'm giving my old MSA some TLC. Would anyone over here have any of these parts for sale? I want to support Michael Yahl but the shipping is $55. :shock:

MSA parts needed:

14 x 5/16" Brass pivot barrels with locking set screws
8 x 3/8" Brass pivot barrels with locking set screws
3x pull rods with threaded ends (at least 27")
1x solid body stop https://www.psgparts.com/Stop-Body-Solid-200-100-034.htm
Small handful of nylon hex tuning nuts
10x nylon changer washers

Thanks!
Jonathan

Posted: **Thu Aug 08, 2019 7:12 pm**

I may well have some of that stuff Jonathon do you get anywhere near St neots?

Posted: **Sat Aug 10, 2019 10:34 am**

Thanks John, I'm not that near but let me know if you think you have any bits!

Posted: **Sat Aug 10, 2019 11:46 am**

no trouble to make up the rods and hex tuners, not be too difficult to make some swivel stops, the changer washers should be available on line if you have the dims. I will look into it.

The British Steelies Society

MSA or equivalent parts

MSA or equivalent parts

Re: MSA or equivalent parts

Re: MSA or equivalent parts

Re: MSA or equivalent parts