Page 1 of 1

And a third one from me...

PostPosted: Thu Oct 03, 2013 6:22 pm
by Jason Lynch

Re: And a third one from me...

PostPosted: Thu Oct 03, 2013 6:55 pm
by David Hartley
Well done Jason, great work.
You're improving all the time.
That was a good song choice too....

David Hartley.

Re: And a third one from me...

PostPosted: Tue Oct 08, 2013 10:31 am
by David Hartley
A bump for Jason....
Give him some feedback guys, I think he's doing really well.

Re: And a third one from me...

PostPosted: Tue Oct 08, 2013 11:47 am
by JohnDavisStringsHere
Yes your right Dave he does deserve the bump .... some nice "Hartley" moves in there......

Re: And a third one from me...

PostPosted: Tue Oct 08, 2013 3:47 pm
by Jason Lynch
Thanks guys!

Re: And a third one from me...

PostPosted: Tue Oct 08, 2013 8:38 pm
by Zebedee
Constructive criticism:
You're playing slightly flat to the backing track, plus you haven't tuned the cabinet drop out of your steel, which makes the flat playing even more noticeable.

Remedy:
You may have your headphone volume too loud, which can cause players to play off-pitch.


Tune your steel with the A and B pedals pressed, then release the pedals and listen to the slight raise in pitch of the fourth string.

Use this fourth string pitch as a reference to tune the open strings, then retune their raises and lowers.

Re: And a third one from me...

PostPosted: Wed Oct 09, 2013 6:59 am
by David Hartley
Thanks zebedee..
I know Jason is open to criticism.

Jason, I also noticed I can hear your pedal operations within your slides.
You must practice slides so that you can't hear these.
A good way to practice this is to pick string 5, slide back 2 frets and operate your A pedal, then slide up 2 frets and release the A pedal..... You should NOT hear the note change at all.

Then your instrumentals will all sound a whole lot smoother.

Looking forward to your next instrumental..

Maybe add more effect too, but don't over do it....

Re: And a third one from me...

PostPosted: Wed Oct 09, 2013 3:51 pm
by Jason Lynch
Thanks Richard, I've had another look at my tuning. Hopefully it's sorted now. The intonation problem is more likely to be my bar placement. That needs work!
David, thanks, I noticed that too! I've had a little practice today, and will do more to get them smoother.