AND SO IT BEGINS!

[telboy]

i'm hoping to rebuild/renovate a guitar my lurvely wife bought me for a birthday/christmas present...[see here] viewtopic.php?f=11&t=404

the guitar turned out to be a bit of a pup? so ive decided to strip it down to basics and have a go at a refurb! SO i'll be asking, begging and pleading for info to help me...so please all, bare with me ive started to strip it, so heres some pic's of it all so far...i'll be updating as i progress, but it may take a while...

http://s37.photobucket.com/albums/e80/b ... ?start=all

and finally...some bits i need...

1]tailend piece
2]bridge
3]pickup
4]nut
5]tuner pan..................................................i'm not sure whether to go 8 or 10 string? as ive only ever played a 6 string plank before! mmm...?

[telboy]

UPDATE!... A DEAL HAS BEEN DONE FOR SOME RATHER NICE ODDS N SODDS, SO IT LOOKS LIKE "ALL SYSTEMS ARE GO" OOOOH I'M ALL EXCITED PICS N DETAILS TO FOLLOW!

[Dave Nutt]

telboy, odds and sods, tell us more? Im keen to know how this is all coming together.
Dave.

[telboy]

Dave, when the bits get here i'll take some pic's and write some details! cheers terry

[telboy]

http://www.facebook.com/l.php?u=http%3A ... rRKFv2NtuQ

[pickup only from this pic]

[telboy]

http://www.facebook.com/l.php?u=http%3A ... hpbzteMnAA

[everything but the pickup from this pic]

[telboy]

The above goodies arrived this morning bright n early, very well wrapped! I would just like to take this oppurtunity to say a MASSIVE THANK YOU to the one n only Mr Bob Adams for being an absolute gent! he is now top of my Christmas card list CHEERS BOB you made an ageing man very happy...NOW COMES THE HARD PART, I'VE GOTTA MAKE THE THING NOW! [so y'all be prepared for loads of questions...]

[Dave Nutt]

Tel, Im sure you will get all the advice (and more) that you need, we will all build it together as long as you do the hammering, screwing and banging.
Im sure its going to keep you busyz during the coming winter evenings.
Dave.

[telboy]

http://s37.photobucket.com/albums/e80/b ... adventure/

righto, i've stripped everything off of the mahogony plank and laid out all the new hardware just to make sure it all fits ok...
1st question of many...should the nut plate be counter sunk so the tuners can go up tight against the mullen board?[SEE PICTURES 6.11.15]
cheers terry...

[bob adams]

Tel, The nut roller’s TDC (top dead centre) must be directly above that fretline at the top of the fretboard which then creates your open tuning position so draw the tuner headstocks up to meet the neck and fit the roller assembly on top, if you are luck the holes may line up, you will of course have to drill into the tuner headstocks and tap a thread or make the hole .5mm under a self tapper size of your choice and lock it up with them.